Forum Replies Created
-
AuthorPosts
-
rdangelParticipant
Thank you Diego, have a great day,
Ross
rdangelParticipantHello again,
I just want to let you know that I tried the WPA/WPA2 cracking attack on the exact same network, with the exact same command strings… but on my Intel Mac and it worked!!! I originally had been working on my Mac M1 and that’s where I was having problems… but for some reason, when I switched machines to the Mac Intel I7 – even though I’m using the same versions of the zSecurity Custom Kali, now it seems to work fine and it has no problem capturing the handshake. Thanks for your suggestions so far… at this point, I’ve got this! Cheers,Ross
rdangelParticipantOK Diego, sorry I thought you wanted the Router info:
– The adapter is a Realtek RTL8812AU which I purchased from you guys on the zSecurity Shop. As I said, it is running in Monitor Mode.
– No I am NOT running a WEP attack. I am taking this Intermediate Network Hacking course because I have already completed the (prerequisite) beginner’s Learn Ethical Hacking From Scratch course on Udemy. The Intermediate course I am doing now picks up WPA/WPA2 Cracking in Section 5 and beginning of Section 6… and it assumes YOU ALREADY HAVE CAPTURED THE HANDSHAKE in the wpa_handshake.cap file…. Zaid does not show you how to do this because he assumes you have already learned how to do that in the Beginner’s course. The problem is… that I have followed Zaid’s lectures in the beginner’s course on WPA/WPA2 cracing, and Capturing the Handshake (Lessons 22, 27, 28 and 29)…. but I am just not able to capture the handshake and the WPS method doesn’t work on my Router. The wpa_handshake capture file never seems to have any data in it. I showed you the messages displayed in my Kali machine in the screenshots I sent you. this is the WPA/WPA2 (NOT WEP) attack I keep trying without success:
– airodump-ng wlan0
– on upper screen: airodump-ng –bssid <target MAC> –channel <channel #> –write wpa_handshake wlan0
– on lower screen: aireplay-ng –deauth 4 -a <target MAC> -c <connected client MAC> wlan0
and no handshake is ever captured. My network name WiFione and as you can see from the screenshots, the MAC keeps changing… sometimes I can’t find a connected client because the target MAC has now changed.
And Diego… I cannot get ANY CLOSER to the Router…. I am literally 3 feet away from it, it’s sitting right in front of me.
Please help, otherwise I am not going to be able to continue with the course… this is one subject I just can’t skip in order to move forward. Thank you,Ross
rdangelParticipantOK Diego, sorry for the repeated attempts. I have the screenshots in Google Drive at these links:
https://drive.google.com/file/d/16b4xb4-0aiWlAbrb7urbF1aOmxHkilyJ/view?usp=drive_link
https://drive.google.com/file/d/1O4W4b8TGiPOdyln0Hjzd2DvnHw-HJ_4f/view?usp=drive_link
https://drive.google.com/file/d/1w_muSj0t8tiKgxPTfvrb1riOHFsMQgh_/view?usp=drive_link
https://drive.google.com/file/d/1smE-sLb6yF5LyiTfu9L2Wsvw7XHG-uqz/view?usp=drive_link
https://drive.google.com/file/d/1oYztPDk0LqDZp-IsFG18D2CvfAKaI1qI/view?usp=drive_linkBTW… additional Router info to what I said above: the router is listed as 2.4GHz, 5GHz-low and 5GHz-High
I hope this helps.
Ross
rdangelParticipantSorry, I have reduced the screenshots each to less than 1 MB, but it just won’t attach them.
rdangelParticipantHi Diego, my Router unfortunately does not come with a lot of information… I believe it was built for my internet provider and so has their own logo and info on it: the brand is not given but I did some digging and I believe it’s Arcadya. The model listed is Telus WiFi Hub… but I think this is just the aftermarket model number they put on it. I’m attaching some screenshots of the process… tried many ways, but it always fails to capture the handshake, even though it says “Association Successful”. There is nothing written in the wap_handshake.cap file.
PS. I have submitted this reply twice now, with screenshots attached, and gotten confirmation from your webpage… but when I return to it to view it I don’t see it on the post
rdangelParticipantThank you Diego, I appreciate your suggestions. I will work on it from this end. Cheers,
Ross
rdangelParticipantHi Diego, thanks for that advice. I get the Script Editor issue…. I need to kill the process from Kali first. As for the IP drifting issue, I am not sure what you mean by “check it out”. I have looked at the settings for my router – it has a 2.4GHz, 5GHz-Low and 5GHz-High settings… and pages and pages of Network LAN, LAN DHCP, WAN, Bridge, DMZ, Dynamic DNS etc etc etc settings that I don’t quite understand. Is this an issue about setting up Static vs Dynamic IPs? Could you give me a bit more specific guidance with this… I feel a bit lost with the tech aspect of this device operation, and I am not very savvy with all the configuration options. Is this not a wifi adapter issue? Would using a different model adapter fix this problem?
rdangelParticipantHey guys, I have not heard back from you for my request for assistance with these Section 12 issues. I know you’re probably really busy but it’s been quite a while so I am not sure at this point whether you just have not had the time to answer… or whether you somehow missed this post altogether. Can you please let me know the status of this query? If you don’t have time to deal with it right now, it’s ok… just let me know that an answer is pending. Thanks for your continued help. Cheers,
Ross
rdangelParticipantHaha…great! BTW… I might as well get rid of that Desktop shortcut at this point – it doesn’t work anyways, especially if I’m just going to use the direct method you taught me above. How do i get rid of it? What’s the command line?
rdangelParticipantDiego… once again you are AWESOME!! Thank you for helping get through another stumbling block. I tried running both those executables… the first one didn’t work – I got the same error, but the (x64).exe one worked fine. Have a beer on me π
Cheers,Ross
rdangelParticipantOK I tried running it from its location, I found it here: /root/.wine/drive_c/Program Files/Bat To Exe Converter/Bat_To_Exe_Converter.exe (it was NOT in the Program Files(x86) folder). I got the same error… I have included screenshots on my Goggle Drive of the results.
https://drive.google.com/file/d/13xWwi7pBMv430n7wwQzt8yzWV591mnGD/view?usp=drive_link. https://drive.google.com/file/d/1zTBxxxSjGe1i8cElEFrCzAx9DYoxvt-L/view?usp=drive_link. https://drive.google.com/file/d/1lonr2P-xfn5Dg9ebNqLhsw1KkMzfzXMf/view?usp=drive_link. https://drive.google.com/file/d/12dleFVqhlUH9eX1Sai7nqKX2nqjSyNqH/view?usp=drive_link. https://drive.google.com/file/d/1AtnO_-1fs4UtXkGdUAEENE936BXBt5Yv/view?usp=drive_link.rdangelParticipantThanks so much Diego – I will give it a try!
rdangelParticipantI just got your previous response with the suggestion to run it directly with wine… I’m sorry, I’m still quite new at this so… how exactly do I do that? What is the command string to run it with wine? And from what terminal directory?
rdangelParticipantHey Diego, I’m not having any luck with this issue, I have tried re-installing it several times and it always just completely freezes up my Kali window when I run it from the Desktop icon like Zaid shows. It doesn’t look like there’s an obvious solution here from you guys so… I would like to completely uninstall and remove everything about this program, and maybe try a different bat-to-exe tool – there’s several listed on Google. Can you tell me the specific command string and procedure to completely eradicate this from my Custom Kali? I don’t want to do this by just deleting the Custom Kali image and start with a new Kali image because I have many month’s worth of programs and tool installations and files that I have compiled through thick and thin, and I would rather NOT have to do all that all over again from scratch to get back to this point. Otherwise I’m going to have to skip a lot of lessons if I don’t get this thing working, because it looks like Zaid keeps referring back to these example .exe files.
-
AuthorPosts