- This topic has 11 replies, 2 voices, and was last updated 5 months, 2 weeks ago by Diego Pérez.
- AuthorPosts
- May 16, 2024 at 11:58 pm #150927rdangelParticipant
Hello,
I have updated my Kali 2022 zSecurity Apple M1 VMWare by downloading and installing the newly released Kali 2024 zSecurity Apple M1 VMWare version. I have both machines in my VMWare. I downloaded and installed Powershell Empire in exactly the same way on the new machine as in the 2022 version, however the server side doesn’t ever seem to work. The client seems to go up and running but when I enter the command: powershell-empire server in the first terminal window… it just goes to a certain point and then stops…. it never displays any active clients info etc. When I test it on my VMWare virtual Windows machine, nothing ever happens, it just does not seem to connect to any active agents. Yes… I have disabled Windows Defender security, and I have done everything by the book, over and over again, but nothing ever happens. I still have the 2022 version of Kali with powershell-empire installed on the same Mac, and when I run that one it works perfectly without issues!! Is there something in this new version of custom Kali that needs tweaking to make Empire work properly? Please help. I need some specific instructions, as I am not well versed in more advanced debugging techniques.
Ross
May 18, 2024 at 12:29 am #151260Diego PérezModeratorHi!
Can you share a screenshot with the results after running the server?Greetings!
DiegoMay 18, 2024 at 2:17 am #151262rdangelParticipantHi Diego, I have attached links to the screenshots of my Empire session. As you can see in the upper terminal window (server) it just stops at that point and does not continue further. No error messages (except for the csharpserver error, which I also get on the 2022 version as well but it still works properly), but it does not continue to a status bar at the bottom displaying agents etc. I have purged and reinstalled the 2024 zSecurity custom Kali 3 times, and there is no difference… I get this every time. I try to run the attack anyway, but no connection is ever made. It just hangs at this point, and goes no further.
https://drive.google.com/file/d/1cXyN6iY_K9MxP3QUB-vO9zxFxwZjOxXD/view?usp=drive_link
https://drive.google.com/file/d/163RGGPQjIv6yo4Ketn3rV85Qa09D6-mv/view?usp=drive_link
https://drive.google.com/file/d/100e5SNlS7AltjL-hKqJdvLWLbhJaDp8y/view?usp=drive_link
https://drive.google.com/file/d/172Fv-BQ6QSlvzLgVUaY5E0xUOArqG-Qz/view?usp=drive_linkThe client side however, seems to work properly and becomes active after I hit execute, but when I open the executable on my virtual windows machine, nothing happens, no agents display as being connected. This exact same process works perfectly using the custom zSecurity Kali 2022 machine.
Ross
May 18, 2024 at 9:08 pm #151554Diego PérezModeratorHi!
The output of the server is just as expected. Can you share the next screenshots:
– the results of ifconfig in kali and ipconfig in windows
– the network settings in VMware for both machines
– the options used to create the listener and the agent
– the content of the .bat file created by empireGreetings!
DiegoMay 24, 2024 at 12:45 am #153226rdangelParticipantDiego…… I am so frustrated. I spend 20% of my time trying to watch the lessons and learn the techniques… and 80% of my time is wasted trying to make the tools work as they should. Since I have updated the Custom Kali version to the 2024 image, I have tried to re-install everything I had worked hard to debug and make work properly before…. the VM machine has broken so many times, I have had to delete and reinstall it so many times that this has just gotten me down. I get so many errors during the installation process for Empire, for The Fat Rat, for Fluxion, and others etc…. that I just give up. None of those tools are actually working for me in the new version. Now I can’t even get Empire installed, so there is no point asking me for screen shots because I can’t even get to where I can launch a practice attack with it. I have looked online for help but there’s a zillion different answers to everything and they all create other problems, I have used chatGPT but that hasn’t really helped either – I am not an experienced computer programmer, I have not taken any Computer Science courses – so I can’t really apply any of my own skills to fixing these issues, and submitting screen shots and posts on this Forum is just taking way too long and is way too cumbersome with vague answers and tips that reflect the assumption that I know more than I really do, in order to really get anything solved in a reasonable amount of time. What I need is tools… and download/installation instructions that actually work! By the time I get anything sorted out I have lost my thread in keeping up with the lesson material anyway, and I end up just skipping forward without having the benefit of actually properly managing any testing in my Hacking Lab. Not a great way to learn. I started along this path because I was intrigued by the topic and interested in exploring possibilities with a subject I love – computers… but “Learning From Scratch” as the courses were described… well that’s not quite right!
May 24, 2024 at 10:47 pm #153546Diego PérezModeratorHi!
Sorry that you are facing such errors, I just tested installing empire and it worked fine (I also have a mac with an M-series chip). What was the exact issue?Greetings!
DiegoMay 27, 2024 at 10:17 pm #154497rdangelParticipantHi Diego, I have more screenshots to share with you to illustrate the issues. My machine is an Apple Macbook Air M1, running on macOS Sonoma ver. 14.5
I have once again purged/deleted Custom Kali 2024 version and started again from scratch with a completely new download – fourth time I have done this:(
The following screenshots are taken after I have run ‘apt update’:
1) Initial Empire download using ‘apt-get install powershell-empire: https://drive.google.com/file/d/1LBLNjaiWIut0cio-MBUrQG1e8P5K9br_/view?usp=drive_link
it stops here and I cannot get any further.
2) Screenshot of Empire running properly on Custom Kali 2022 version – same machine: https://drive.google.com/file/d/1WWhcMQC4QGObcxjDC2XreeQCy9MTDsV2/view?usp=drive_link
3) Initial attempt to download Fluxion: https://drive.google.com/file/d/1s2NaO8oNImxF6uRzqkZqsE1YJs6CTV9k/view?usp=drive_link
4) Fluxion install hangs up here: https://drive.google.com/file/d/1xcNxALPTUmwNjHS_MSIiU0Wf5KlsoiZp/view?usp=drive_link
5) This is the result regardless of of choice I enter: https://drive.google.com/file/d/1Zce7bZJrO9iXXl8Zy4jkgcmDoeF2ueQB/view?usp=drive_link it goes blank and freezes, I have to force stop it and try to restart.
6) Attempt to restart Fluxion: https://drive.google.com/file/d/1YB7WKhjm_MbH80oY_Yxh0lp66_b2T2XE/view?usp=drive_link
7) Result of restart of Fluxion after forced stop – Kali is broken and I cannot get it back to normal operation unless I delete it and reinstall it from scratch (which I have done numerous times: https://drive.google.com/file/d/1vtRhyaupceH3LCmzrVvJtqznjbdJGrMB/view?usp=drive_link
I have been spending many frustrating hours trying to update the new Custom Kali 2024 with tools I had in the older version, as well as trying to go through the Learn Network Hacking Intermediate course (because I have already done the Learn Ethical Hacking from Scratch course), and I need to have Fluxion working properly so that I can continue my learning past Lesson 7.2. I am in limbo and cannot go any further at this point until I get these issues resolved. Can you please help me?Ross
May 29, 2024 at 9:05 pm #155150Diego PérezModeratorHi!
Download a new custom kali, it was updated like 2 days ago, and it should work fine, I tested it. The latest version is v1.0.13.1, I can see you are using the previous one.Greetings!
DiegoMay 30, 2024 at 5:19 am #155166rdangelParticipantHey Diego, thank you for that heads up, it really helped. I downloaded version v1.0.13.1 and started reinstalling tools. I installed Storm Breaker with no issues, I installed Fluxion with no issues, and then I installed Empire. I haven’t had a chance to test it, but when i start the Server to see if it will run I get these errors:
https://drive.google.com/file/d/16QJkMs2nst5H8vvc71F6uw2IeJBgjBw4/view?usp=drive_link
I see that in Zaid’s video lesson on Empire it shows csharpserver running properly, but here I get an error; also there’s the [No such file or directory found: ‘dotnet’] and [Plugin failed to run csharpserver]. Are these errors something that needs fixing? You can also see at the bottom of the terminal window there is no EMPIRE TEAM SERVER bar with Agents and Listeners displayed…. the cursor is just stopped there and blinks. Here’s a screenshot of the bar on the 2022 Custom Kali version:
https://drive.google.com/file/d/1WWhcMQC4QGObcxjDC2XreeQCy9MTDsV2/view?usp=drive_link
Any thoughts?
Thank you for getting me back on track to this point, I’m just wondering if it needs a bit more tweaking to get it to work properly, or if it can work the way it is, with these errors displaying when I start the powershell-empire Server?May 30, 2024 at 9:04 pm #155442Diego PérezModeratorHi!
Unfortunately not all the tools have support for the M-series chips, empire will work fine for most of the functionality even if those errors show up. And the empire version you are using will display that Uvicorn message when is ready to be used, this is normal. Everything seems to be working fine, try it out.Greetings!
DiegoMay 31, 2024 at 5:10 pm #155697rdangelParticipantOnce again, thank you Diego. You have been most helpful in getting me back on track. I definitely gotta buy you a beer;)
Ross
June 1, 2024 at 9:33 pm #156116Diego PérezModeratorGlad you got it bro.
Greetings!
Diego - AuthorPosts
- You must be logged in to reply to this topic.