Tagged: 

Viewing 15 posts - 1 through 15 (of 26 total)
1 2
  • Author
    Posts
  • June 27, 2022 at 12:47 pm #65140
    BogusBogus
    Participant

    Hi

    I have changed the Wifi settings from Acces Point to Join a Network.

    After changing this setting I do not no how to acces the USB /GUI (before this it was on 192.168.1.1)

    Please advice.

    Thank you!

    Kind regards,
    Jos

    June 27, 2022 at 4:32 pm #65155
    Diego PérezDiego Pérez
    Moderator

    Hi!
    You have set a static IP when you configured it to connect to a network. So you have to connect to that same network and go to
    http://[the-static-ip]/home

    Greetings!
    Diego

    June 27, 2022 at 6:31 pm #65158
    BogusBogus
    Participant

    Hi! Yes, I tried to connect to 192.168.1.1 , which I set as IP, but it doesnt connect..

    What can I do?

    June 29, 2022 at 5:13 pm #65200
    Diego PérezDiego Pérez
    Moderator

    Hi!
    Can you share a screenshot of the rowser where we can see the URL used and the result?

    Thanks!
    Diego

    June 30, 2022 at 7:59 am #65213
    BogusBogus
    Participant

    Sure! Here it is 🙂

    Attachments:
    You must be logged in to view attached files.
    June 30, 2022 at 5:11 pm #65222
    Diego PérezDiego Pérez
    Moderator

    Hi!

    Are you sure you are connected to the network created by the cactus?

    Let me know.
    Diego

    June 30, 2022 at 9:59 pm #65229
    BogusBogus
    Participant

    Hi!

    I am connected to my home network. I am unable to find The cactus network after enabling Join a network

    July 1, 2022 at 1:54 pm #65239
    BogusBogus
    Participant

    Ps: after enabeling Join a network, I did not change the static ip. So I the default setting should be active. This is 192.168.1.1/home correct ?

    July 1, 2022 at 11:54 pm #65251
    Diego PérezDiego Pérez
    Moderator

    Hi!
    Ok, if you configured it to join your home network (the very first time I mean) then it should be there in the static ip unless that static ip is used by your router for other means. You can enter to the router’s web interface configuration and check if the cactus is connected to it and which ip it has assigned, then use it.

    Greetings!
    Diego

    July 2, 2022 at 9:42 am #65257
    BogusBogus
    Participant

    Yes, i have tried this but could not ginder it. I Will try again and let you know!

    November 30, 2022 at 12:07 am #68906
    mslysz22mslysz22
    Participant

    Hey there, so I am in on the control center and I have a couple questions,
    – What is the username and password needed to get into the settings of the Control Center of the ZS Cactus website?

    – And what how do you get the Windows Wifi password sent from to my address?

    November 30, 2022 at 6:06 pm #68918
    Diego PérezDiego Pérez
    Moderator

    Hi!
    You said you already are in the Control Center but you are asking for credentials, then which credentials did you used to get into the COntrol Center? Or can you elaborate much more? Because it’s a bit confusing.
    In any case you can find the password in the description section:

    ZSCactus WiFi Keystroke Injection BadUSB

    Also please elaborate the second question because it’s not clear neither.

    Thanks!
    Diego

    December 4, 2022 at 1:58 am #68976
    mslysz22mslysz22
    Participant

    Sorry for the confusion, When I am in the ZScactus webpage (192.168.1.1), and try to go to setting for the ZScactus I am greeted to this:

    Do you know what the username and password is. I have tried my ZS security password and Username it does not work.

    Thank you
    -Micah Slysz

    Attachments:
    You must be logged in to view attached files.
    December 5, 2022 at 5:11 pm #68992
    Diego PérezDiego Pérez
    Moderator

    Hi!
    It shouldn’t require a username and password, just click cancel and you should be able to use the web interface properly.

    Greetings!
    Diego

    February 6, 2023 at 2:40 pm #70455
    PierpaoloPierpaolo
    Participant

    Hello, I have a problem when I’m trying to use email address and code to access the control panel. I put the credentials and then it goes to http://192.168.1.1/validate and it stucks in a blank screen.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 26 total)
1 2
  • You must be logged in to reply to this topic.